Is this happening?
Speech drops when someone turns away. Online viewers miss words. Boosting gain adds hiss. You can't keep a stable speech level.
How the problem shows up
People naturally turn to look at the congregation, read, or step back. Off-axis speech gets quieter. If your chain already needs high gain, speech becomes fragile.
The problem
Movement and off-axis speech reduce level. If you're gain-starved, you lose words.
The fix
Strengthen the mic signal so the chain has more usable range without noise penalties.
Mic → Cloudlifter → Mixer/Interface (phantom power +48V ON) → Stream
Note: Cloudlifters work with passive dynamic and passive ribbon microphones. They are not compatible with condenser microphones that require phantom power through their XLR connection.
Choose your Cloudlifter
If you want the simplest setup: use the CL-25 Mini. It's the quickest "one connection" way to add clean gain. With the CL-25 Mini, it plugs directly onto the mic's XLR output, and your single XLR cable connects from the CL-25 Mini to the mixer or interface.
If you already own a Cloudlifter: the CL-1, CL-2, and CL-4 do the same job (clean mic activation). They use the standard inline connection in your mic chain.
A quick example
A lector turned to the side and online captions dropped words. Adding a Cloudlifter allowed lower gain and more consistent capture when people moved naturally.
FAQs
Will this replace mic training? No, but it makes normal movement less damaging.
Where does it go? Mic → Cloudlifter → mixer/interface (phantom power +48V ON).
Does my mixer or interface need to supply phantom power? Yes. The Cloudlifter requires +48V phantom power from your mixer or interface to operate. Enable phantom power on the channel the Cloudlifter is plugged into. The Cloudlifter uses that phantom power to provide up to +25dB of clean gain — without it, no signal passes.
Quick takeaway
If speech disappears when people move, a Cloudlifter helps you get more mic and less preamp—more consistent worship speech.
